Connectivity

Loop not Identified during Loop Scan (Rockwell Edition)
The Rockwell Edition of Loop-Pro Tuner can to connect to any PID Model for live tuning, as long as the Tuner product version matches the PID OEM. If the l...
Wed, 30 Dec, 2015 at 11:10 AM
Create an OPC Topic in RSLinx (Rockwell Edition)
To connect to a live PID loop, a PLC OPC topic must be created within RSLinx.  To do this, follow the procedure in the "Create an OPC Topic in RSLinx&q...
Wed, 30 Dec, 2015 at 9:57 AM
Connecting to a SLC500 or PLC-5 Integer Controller (Rockwell Edition)
Loop-Pro TUNER is unable to scan for SLC500 or PLC-5 Integer type controllers.  To connect to a controller of this form, the loop must be added as a favorit...
Wed, 30 Dec, 2015 at 9:57 AM
Procedure for Connecting to a Rockwell Controller (Rockwell Edition)
To connect to a Rockwell controller, follow the procedure in the "Procedure for Connecting to a Rockwell Controller" section of the attached docum...
Wed, 30 Dec, 2015 at 11:11 AM
Unable to Scan OPC Server (Rockwell Edition)
Symptom:  If the Loop-Pro TUNER software is unable to connect to the RSLinx OPC server, it will generate an error message stating that it is unable to conne...
Wed, 30 Dec, 2015 at 9:57 AM
Controller Only Shows Offline Option (Rockwell Edition)
Symptom: When scanning the OPC server, the desired controller is identified, but only shows "Offline" option (does not display "Online" ...
Wed, 30 Dec, 2015 at 9:50 AM
Connecting to a Controller Using a Custom AOI (Rockwell Edition)
To connect to a Rockwell controller using a custom Add-On Instruction (AOI) which is not in the Loop-Pro TUNER library, a custom signature file must be crea...
Fri, 30 Nov, 2018 at 2:51 PM
Unable to Connect to a Rockwell Controller (Rockwell Edition)
Several issues may cause the Loop-Pro TUNER software to be unable to connect to a Rockwell controller: 1. If the loop is not found during the loop sca...
Wed, 30 Dec, 2015 at 11:17 AM
Connecting to a PID Block Using a Custom AOI (Processing Multiple Loops Within One PID Block)
If you are using one PID block to tune and control multiple PID loops, you will need to manually connect to each of the tags associated with each of the ind...
Fri, 30 Nov, 2018 at 3:06 PM